AQPC MODEL No: 5051 SPECIAL “AQPC”ALUMINIUM Tiltable Square type extendable tower ladder. In two folds made out of aluminum C section of size 66mm x 31mm x 3mm* thick approx. with steps of sizes: • 25mm 1” dia approx. fluited aluminium pipe. at the required distance of 300mm apart complete with set of 8mm Usa martain duble steel wire rope, M.S. pulleys and winch system for extended and closing the ladder at any required height fabricated on M.S. channel frame of size 100mm x 50mm x 6mm mounted on four special type castor wheels (Maruti wheel two revolving and two fixed) of size 12” x 3” with ball bearings. Workmen’s platform is provided 3 ft. below from the top size 24” x 24” and one tool tray of size 24” x 8” on the top. The platform is guarded from three sides for safe working. A handle is also provided on the front side of ladder for easy moving. Further the ladder may be provided with mechanical system to tilt the complete ladder on rest and again lift the same for working having additional winch set completed with required M.S pulley and steel wire rope to enable to reduce extra man power to handle the ladder. And gear boxes 2 No. of 01ton & 02 ton each brakes are provided on the 2no. fixed wheels and 2no revolving wheels total 4nos wheels. Adjustable Jacks at four ends of the M.S.Frame and M.S.Channel Base covered with M.S.Sheet and Trolly Base size :– 08 x 5ft Tiltable ladder Height 8ft., Platform working Height 34ft. Aluminium Tiltable Tower ladder and Aluminium Maruti wheel tower ladder.